33 Coupe Paint 20        10/2/05

Here you can see Rob hard at work masking off an area at the bottom of the cowl. Rob is getting ready to start cutting out the flames after he's done here. 
 

 

 

By looking at this fender, it's hard to tell what's going to have new paint on it and what won't. Once Rob had them cut out, it was still a little hard to tell so don't feel bad if you do see it either.
 

 

 

This should give you a better idea of what the flames will look like. Rob started on the hood, then worked his way to the hood sides, front fenders and then the doors. I really like the looks of those flames he's cut out.
 

 

 

Here's a shot of the door, cowl and fender. Notice how the flames continue onto the cowl area. They also wrap around into the firewall too so it should look good with or without the hood sides.
 

 

  1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29
30  31  32  33  34  35