|
Here is my wiring harness attached to
a piece of wood. What I wanted to do was do away with the plain wood
look so let's take a look at what I did.
|
|
|
Now that's what I'm talk'n about. I
think it looks much better now that it has paint on it. Bart covered the
wood with urethane first (which is on both sides) and then applied the
paint. I hope everything still works after I install it again!!!
|
|
|
One other thing I did with my free
time was polish my door hinges. They happen to be made out of stainless
steel so I took them apart and sanded them a little before I ran them
across the buffing wheel. What a difference that made. I know they won't
show very much but I sure do like how they turned out. I'll be
installing them this week along with attaching the doors which means the
car is very close to receiving graphics. I'm on the home stretch now so
don't no body go no where!!
|
|
|
|
1
2 3
4 5
6 7
8 9
10 11
12 13
14 15
16 17
18 19
20 21
22 23
24 25
26 27
28 29
|
|
30
31 32
33 34
35
|
