This is where the A-arms will bolt up.
I wanted to show a close-up of it and to show how nice the welds are.
These guys know how to throw a nice bead now don't they! You can also
see the brake line fitting to the left of the A-arm bracket that goes
through the frame rail.
|
|
|
To be able to bolt the spindles up, we
have to have A-arms. These polished stainless steel pieces should do
just fine. The smaller one is the top A-arm and they both have a nice
luster to them.
|
|
|
Here you can see just how nice they
really are. Even the acorn nuts are polished. The bracket on top of the
longer A-arm is a shock mount. This is another option that I just
had to have....being polished and all.
|
|
|
To bolt the A-arms to the chassis, you
have to have bolts. This bag of bolts, washers and nuts have all been
chromed and they look just as nice as the above pieces do. I can't wait
to start installing all this hardware.
|
|
|
|
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17 18 19
20 |
|
21
22 23
24
25 26
27 28
29 30
31 32
33 34
35 36
37 38
39 40 |
