This is where I mounted the relay
which is inside the frame rail. Notice the radiator is right next to it
which is a good thing because the wire that goes to the fan (red) isn't
very long. I just ordered two 10" puller fans so look for a little
info on them soon.
|
|
|
These are going to be used for my
front turn signals and parking lights, which uses a two filament bulb.
There made by
Vintique Inc. and have a chrome plated housing with an amber lens.
I was originally going to use some flush mount lighting but decided
against in at the last minute. If I change my mind about the flush
lights, I can always take these out and switch to the others.
|
|
|
|
I made some "L" shaped brackets
and fastened them inside the grill next to the radiator. This way they
won't be so noticeable and hopefully look descent.
|
|
|
You can see them pretty well behind
the grill with the sun shining on them but they get hidden with shade.
I'll see if I like them enough as time goes by but for now, they should
work fine.
|
|
|
|
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17 18
19 20
21
22
23 24
25 26
27 28 |
|
29 30 31
32 33
34 35 |
