|
It's Finished
This is what the clock looks like if the points were facing upward.
|
|
 |
And here the flats are facing upward.
|
|
 |
The rotor nut isn't as shiny now, but it shouldn't rust either.
|
|
 |
I used some 1 1/4" long screws to hold the mounting hardware on, which
goes into the hardwood for even more strength.
|
|
 |
The contrasting fasteners look nice and the brass hands match as well.
|
|
 |
I had fun making these clocks and I might make two more in the near
future. Now it's time to give these clocks away (no pun intended).
|
|
 |
|
1
2
3
4
5 |
