As you can see I've put my brand on this project.
 

The following day I sprayed the front, but the weather conditions were not in my favor. The wind was blowing a little too much and I had a hard time covering with even coats. The next day I bought this brush-on Polyurethane that worked really well. I kick myself for not starting with it.
 

I lightly sanded with 400 paper before applying the brush on clear. And I had a hard time getting rid of the streaks from the spray can, but after three coats, this is what it looks like.
 

It's Finished

Here it is all finished. I fastened it to the wall in stead of the bed frame. This way I can move the bed and not worry about the headboard being a problem while doing so.